搜索ansys dm集成配置导入SolidWorks失败的情况和处理方法
2023-01-05 by:CAE仿真在线 来源:互联网
如果你在ansys的design modeler中导入SolidWorks模型文件的时候出现下面错误:
对SolidWorks模型执行后,出现import error:attach failed,attach feature import1 怎么办?
一般是因为ansys没有正确配置SolidWorks,比如先装ansys后装SolidWorks,或者SolidWorks版本不对,或者SolidWorks安装后卸载了,并更新了版本。
这些除了版本不对之外,都可以通过Ansys CAD configuration来解决。
但是使用Ansys CAD configuration后可能依然失败,那是因为配置没有成功。
这种情况可以参考本文措施:
Previous configuration log backed up to: C:\Users\ggggoooo\AppData\Local\Temp\ANSYS\CADConfigLogs\v211\Latest\..\20230105\CADConfigurationMgr_230349.log
___________________________________________________________________________
______________________________________________________________________
Execution Time: 2023/1/5 23:03:49
Local OS Version: Microsoft Windows NT 6.2.9200.0
Network Installation: False
Machine Name: GOGO
Current User: GOGO\ggggoooo
Role: User
Mode: Configure, Admin Install
Installing User: GOGO\ggggoooo
Working Directory: C:\Users\ggggoooo
Process Directory: C:\apps\ANSYS Inc\ansys2021r1\v211\commonfiles\CAD\bin\winx64
AWP_ROOT211: C:\apps\ANSYS Inc\ansys2021r1\v211
System Directory: winx64
LOCALE: en-us
SILENT: False
______________________________________________________________________
************************** Warning **************************
User is not an Administrator
This tool requires Administrator Rights, some products will not run correctly when configured in this mode.
*********************************************************
Reading uninstallFile from:C:\Users\ggggoooo\AppData\Roaming\\Ansys\v211\ProdConfig\uninst_data.dat
C:\Users\ggggoooo\AppData\Roaming\\Ansys\v211\ProdConfig\uninst_data.dat is present
ReadPackageInstallData succeeded.
******************************** WARNING ********************************
Bypassing 'winRegisterCADIntegrationDLLs; due to non-administator status
Certain products will not run properly unless CAD Configuration Utility is rerun as Administrator
*************************************************************************
CCMInfoFileXmlBackUpPath is:C:\Users\ggggoooo\AppData\Local\Temp\CADConfigurationInfo.XML
______________________________________________________________________
______________________________________________________________________
<<SOLIDWORKS PlugIn>>
SW Registration ExitCode 5 -- expecting 0
SpaceClaimEngineeringConfiguration Not Detected
Saving to C:\apps\ANSYS Inc\ansys2021r1\v211\commonfiles\CAD\CADConfigurationInfo.XML
Writing to C:\apps\ANSYS Inc\ansys2021r1\v211\commonfiles\CAD\CADConfigurationInfo.XML
WriteUpdateConfigurationStatusFile Update Success
解决办法是:使用管理员权限打开Ansys CAD configuration,这个会提示,如果提示是如上图,则操作不会成功。
对于管理员权限,也要注意如下方面:
1、关闭所有的ansys和SolidWorks软件
2、如果一次不行,请多试几次,还可以unconfiguration然后configuration
相关标签搜索：ansys dm集成配置导入SolidWorks失败的情况和处理方法 Ansys有限元培训 Ansys workbench培训 ansys视频教程 ansys workbench教程 ansys APDL经典教程 ansys资料下载 ansys技术咨询 ansys基础知识 ansys代做 Fluent、CFX流体分析 HFSS电磁分析 Abaqus培训
